The following products have been found matching your search "fuer": 66

Close filters
  •  
    •  
    •  
    •  
    •  
  •  
    •  
    •  
    •  
  •  
    •  
  •  
    •  
  •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
  •  
    •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 2
No results were found for the filter!
Osborne Lacing Needle
Osborne Lacing Needle
Osborne Lacing Needles Spring steel. The leather braid can be clamped in the rear area. Length 57 mm / thickness 0.9 mm
Content 1 piece
€0.95 *
Replacement Blades for Leather / Carpet Knife
Replacement Blades for Leather / Carpet Knife
Replacement Blades for Leather / Carpet / Utility Knife 10 trapezoid blades in dispenser 0.45 mm thick, ice-hardened from tool steel, suitable for our leather / carpet / utility knife PAR_64/U.
Content 10 piece (€0.28 * / 1 piece)
€2.80 *
Replacement Blade for Stitching Groover
Replacement Blade for Stitching Groover
Replacement Blade for Stitching Groover / Scratch Max. distance to rip fence 35 mm / groover width 1mm / depth of cut with single application 0.3 mm You can get the stitching groover here.
Content 1 piece
€6.90 *
Snap Setter for Line 24 / Ø 15.0 mm
Snap Setter for Line 24 / Ø 15.0 mm
Snap setting tool Three-piece set for Line 24 / Ø 15.0 mm spring ring snap types. Easiest operation.
Content 1 set
€14.20 *
Edge Guide Swivel Knife
Edge Guide Swivel Knife
Plastic edge guide for the swivel knife for parallel cuts along the edges. The swivel knife is attached by a small screw. Suitable up to a distance of 40mm and as close as 4mm to the edge.
Content 1 piece
€7.20 *
Sharpening Tool Swivel Knife Blades
Sharpening Tool Swivel Knife Blades
Sharpening Tool for Swivel Knife Blades You can clamp your swivel knife blade into this tool to always retain the exact angle when sharpening. Please loosen the grub screw to insert the swivel knife blade. Then loosen the locking...
Content 1 piece
€19.95 *
Handle for 2D / 3D stamps
Handle for 2D / 3D stamps
Handle for 2D / 3D stamps Handle-Ø: 12,8 mm / intake-Ø: 8,5 mm / total length: 95 mm Handle for 2D & 3D Stamps . In order to optimize the impact pattern and to achieve an even look of the imprint (especially with large...
€8.95 *
Universal – Setting Tool for Rivets and Snaps
Universal – Setting Tool for Rivets and Snaps
Setting tool for all standard double cap rivets and pushbuttons (Line 20 and Line 24 / small & large) 6 - piece set consisting of an anvil with a straight and 4 concave faces (Ø 8.0 mm, 10.5 mm, 13.0 mm, 15.5 mm) for rivets and...
Content 1 set
€39.90 *
Replacement Blade for Lap Skiver/Splitter (Hi- Tech)
Replacement Blade for Lap Skiver/Splitter (Hi- Tech)
Replacement Blade for Leather Splitter (Hi-Tech). Blade length 145 mm, total length 197 mm.
Content 1 piece
€211.30 *
Heavy-duty handle for 2D / 3D stamps
Heavy-duty handle for 2D / 3D stamps
Heavy-duty handle for 2D / 3D stamps Handle-Ø: 22,0 mm / intake-Ø: 22,0 mm / total length: app. 128 mm This extremely heavy and massive handle can be used as an alternative to the Heavy Duty Ram Foot. Recording for all 2D &...
€23.50 *
Replacement handle for small stamps
Replacement handle for small stamps
Replacement handle for small stamps from our sets. ( e.g. native set or small letter and number sets ) handle-Ø: 8,0 mm / intake-Ø: 4,5 mm / total length: 94 mm Not suitable for 3D  - Stamps. Please use...
€4.95 *
Ceramic Blade for Swivel Knife
Ceramic Blade for Swivel Knife
Ceramic Blade for Swivel Knife (price per piece) Re-sharpening of the blade is eliminated. Permanent sharpness and edge retention for exact cuts. These blades are suitable for our swivel knife, ergonomic - swivel knife...
Content 1 piece
€51.60 *
Blades for Swivel Knife
Blades for Swivel Knife
Blades for Swivel Knifes (price per piece) These blades are suitable for our swivel knife, ergonomic swivel knife and swivel knife sets with a shank size of 5.5 mm . (Not suitable for Barry King swivel knives.) For sharpening we...
Content 1 piece
€14.50 *
Replacement Needle for Automatic Awl
Replacement Needle for Automatic Awl
Replacement needle (for automatic awl) Available options: - thick straight needle (length 54 mm / Ø 1.9 mm) - narrow straight needle (length 45 mm / Ø 1.5 mm) - curved needle (length 44 mm / Ø 1.6 mm) When ordering 1 piece, you...
Content 1 piece
€10.25 *
Perma-Lok Needle
Perma-Lok Needle
Perma-Lok / braiding needle for leather braids Made of brass. The leather braid must be "pointed" with a scalpel and can then be screwed into the threaded hole at the rear end of the needle. #2:  length 56,0 mm, thickness...
Content 1 piece
€6.60 *
Replacement Blades Strap Cutter
Replacement Blades Strap Cutter
10 replacement blades for strap cutter.
Content 10 piece (€1.51 * / 1 piece)
€15.10 *
Universal – Spot Setting Tool
Universal – Spot Setting Tool
Setting tool for round spots 5-piece-set, consisting of 4 different decorative spot tools tools and an anvil which also serves as a repository. The setting tools are suitable for ornamental spots of the following sizes: 1/4" (6.35...
€58.90 *
Strop Board
Strop Board
Strop Board for polishing and stropping of swivel knife blades, round knives or other sharp blades. The strop board is a good alternative to a sharpening stone from our range as it is quite easy to handle. Our strop board consists...
Content 1 piece
€15.90 *
Replacement Blade for freehand stitching groover
Replacement Blade for freehand stitching groover
Replacement blade for stitching groover "Freehand I" Blade width 1 mm / cutting depth with single application 0.3 mm
Content 1 piece
€8.10 *
Replacement Blade for stitching groover w/ rip fence "mini"
Replacement Blade for stitching groover w/ rip fence "mini"
Replacement blade for stitching groover w/ rip fence "mini" Blade width 0.9 mm / cutting depth with single application 0.3 mm
Content 1 piece
€6.50 *
Snap setting tool 15 mm for screw presses
Snap setting tool 15 mm for screw presses
Snap setting tool 15 mm for screw presses 4-part complete set suitable for all ring spring push buttons available in our shop with a size of 15 mm. Note: - For use, you need a screw press with a 1/4" thread and a 24 pitch (6.35...
Content 1 piece
€139.00 *
Screw Press - Tubes
Screw Press - Tubes
Screw Press Tubes - 15 different sizes Available tubes (Ø mm): 0.5 - 7 mm + 8 mm Hint: - The tubes only fit into screw presses witht the below dimensions. Dimensions: Top thread: 1/4 "with 24 pitch (6.35 mm) Insert below: Ø 12...
Content 1 piece
From €8.50 *
Screw Press Anvil
Screw Press Anvil
Screw Press Anvil - 3 different sizes Available anvils (Ø mm): 12 mm, 24 mm, 28 mm Hint: - Anvils require an insert with a diameter of 12 mm. When ordering, you will receive 1 anvil of the chosen size!
Content 1 piece
From €12.95 *
Tubes for Japanese Screw Punch
Tubes for Japanese Screw Punch
Tubes for the original Japanese screw punch (screw punch made in Japan) in 7 different sizes Original tubes for our Japanese screw punch. Available in following sizes: - 1.0 mm - 1.5 mm - 2.0 mm - 2.5 mm - 3.0 mm - 3.5 mm - 4.0 mm...
Content 1 piece
€18.95 *
Snap setting tool 12.5 mm for screw presses
Snap setting tool 12.5 mm for screw presses
Snap setting tool 12.5 mm for screw presses 4-piece complete set suitable for all ring spring snpas available in our shop with a size of 12.5 mm. Note: - For use, you need a screw press with a 1/4" thread and a 24 pitch (6.35...
Content 1 piece
€139.00 *
Cap Rivet Setter 11 mm for Screw Press
Cap Rivet Setter 11 mm for Screw Press
Cap Rivet Setter 11 mm for Screw Press 2-part complete set Suitable for all cap rivets available in our shop with a cap diameter of up to 11 mm. Note: - For use, you need a screw press with a 1/4" thread and a 24 pitch (6.35...
Content 1 set
€74.90 *
Replacement Blades for Selzer Pocket Planer (Gymnastic)
Replacement Blades for Selzer Pocket Planer (Gymnastic)
Replacement Blades for Selzer Pocket Planer (Gymnastic) When ordering 1 piece, you will receive 1 box of 5 replacement blades for Selzer pocket planer.
Content 5 piece (€0.99 * / 1 piece)
€4.95 *
Craft Japan Center Gauge – Hole Stencil for Straps
Craft Japan Center Gauge – Hole Stencil for Straps
Craft Japan Center Gauge – Holes for Straps, For precisely centered marking of holes on belts and straps. Preset distances in 0.5cm. 2.5 cm equal 1 inch. Usuable for straps up to 40 mm width (approx. 1.5”).
Content 1 piece
€10.90 *
Professional Blade for Swivel Knife
Professional Blade for Swivel Knife
Professional Blade for Swivel Knife (price per piece) These blades are suitable for our swivel knives with a 5.5 mm shank size . The blades, which are made of high-strength and cutting properties HCS 1055 glide very well through the...
Content 1 piece
€29.95 *
Double Cap Rivet Setter 7 mm for Screw Press
Double Cap Rivet Setter 7 mm for Screw Press
Double cap rivet setting tool 7 mm for screw presses 2-piece complete set suitable for all double cap rivets available in our shop with a cap diameter of up to 7 mm. Note: - For use, you need a screw press with a 1/4 "thread...
Content 1 set
€74.90 *
Double Cap Rivet Setter 9 mm for Screw Press
Double Cap Rivet Setter 9 mm for Screw Press
Double cap rivet setting tool 9 mm for screw presses 2-piece complete set suitable for all double cap rivets available in our shop with a cap diameter of up to 9 mm. Note: - For use, you need a screw press with a 1/4 "thread...
Content 1 set
€74.90 *
Double Cap Rivet Setter 11 mm for Screw Press
Double Cap Rivet Setter 11 mm for Screw Press
Double Cap Rivet Setter 11 mm for Screw Press 2-piece complete set suitable for all double cap rivets available in our shop with a cap diameter of up to 11 mm. Note: - For use, you need a screw press with a 1/4 "thread with 24...
Content 1 set
€74.90 *
Replacement Blades # 11 for Scalpel Handlef (#3) (10 pcs.)
Replacement Blades # 11 for Scalpel Handlef (#3) (10 pcs.)
Replacement Blades No. 11 for Scalpel Handle (# 3) (10 pieces) Individually sterile packed blades. Ideal for the finest work, e.g. in 3D cutting techniques or for filigree cutting. The enclosed blade No. 11 has a long triangular blade...
Content 1 piece
€7.15 *
Loxx setting tool for screw presses (for rivetable Loxx parts)
Loxx setting tool for screw presses (for rivetable Loxx parts)
Loxx setting tool for screw presses (for rivetable Loxx parts) 2-piece complete set especially suitable for all rivetable Loxx parts available in our shop. Note: - For use, you need a screw press with a 1/4" thread and a 24...
Content 1 set
€149.00 *
Loxx - Button, Ball Rivet (for screw press tools)
Loxx - Button, Ball Rivet (for screw press tools)
Loxx - button, lower part "rivet-small" (for screw press tools) The Loxx button is a secure, lockable yet detachable fastening and securing solution that prevents inadvertent opening. Originally developed for the attachment of...
Content 1 piece
From €1.15 *
Brass Belt Hook for straps up to 50 mm
Brass Belt Hook for straps up to 50 mm
Belt hook made of brass for 50 mm maximum belt width Suitable for attaching e.g. leather straps or braidwork on a belt / belt with a maximum width of 50 mm or directly on a waistband. Dimensions: Total length: 77 mm Total width:...
Content 1 piece
€13.50 *
Setting Tool for Domed Rivets
Setting Tool for Domed Rivets
Setting tool for domed rivets in 4 different sizes Selection list / sizes: - 7.0 mm - 10 mm - 13 mm - 16.0 mm If you order 1 piece, you will receive 1 insertion tool for domed rivets of the selected size.
Content 1 piece
€9.90 *
Hakenplatte, (für Schlüsseletuis)
Hakenplatte, (für Schlüsseletuis)
Hakenplatte, (für Schlüsseletuis) passend für 6 Schlüssel. Die einzelnen Haken sind selbstverschließend und beweglich gelagert. Die Hakenplatte kann mit Hilfe von z.B. Rundkopfnieten auf vielen verschiedenen Untegründen befestigt...
Content 1 piece
€5.90 *
Ersatz-Stiel für Hultafors - Holzspalthammer 2500 g
Ersatz-Stiel für Hultafors - Holzspalthammer 2500 g
Gerader Ersatz-Holzstiel aus amerikanischem Hickory - Holz, incl. Holzkeil. (Modell: YSR 800-55x27) Passend für: HUL_840185 , Hultafors - Holzaxt HY 10 (1500 g) Abmessungen: Länge: 80 cm
Content 1 piece
€29.80 * €33.80 *
Belt Loop Staples, Stainless Steel
Belt Loop Staples, Stainless Steel
Stainless steel staples for belt loops For easy and flush connection of belt loop ends. (See figure 2). The staples can be easily driven into up to 3 mm thick leather due to the sharp cramps. As a base, a small anvil made of e.g....
Content 100 piece (€0.12 * / 1 piece)
€12.15 *
Craft Japan Blades for Swivel Knife
Craft Japan Blades for Swivel Knife
Craft Japan Blades for Swivel Knives These high quality and polished blades are, with the exception of our Barry King swivel knives, suitable for all our swivel knives with a 5.5 mm blade shank. For sharpening we recommend our...
Content 1 piece
€9.95 *
Strap Ends Template Stencil
Strap Ends Template Stencil
Transparent, 3 mm thick acrylic stencil for marking or cutting English point and round strap ends and for marking belt holes. Suitable for belts with the following widths: - 25,40 mm (1") - 31,75 mm (1 1/4") - 38,10 mm (1 1/2") -...
Content 1 piece
€28.20 *
Design Corners/Edges Template Stencil
Design Corners/Edges Template Stencil
Transparent, 3 mm thick acrylic template stencil for marking or cutting 9 different design corners/edges. Dimensions : Length: 160 mm Width: 110 mm Thickness: 3 mm
Content 1 piece
€26.40 *
Refillable Felt Pen
Refillable Felt Pen
Felt pen for leather colours (refillable) Empty felt pen for filling with leather dyes in 2 different sizes. Ideal for colouring small areas, signing and writing on workpieces or even dyeing of leather edges. Suitable for filling...
Content 1 piece
From €5.70 *
Round Corners Template Stencil
Round Corners Template Stencil
Transparent, 3 mm thick acrylic stencil for marking or cutting round corners. Subsequent inner and outer radii are shown on the template: - 5.0 mm - 6.0 mm - 7.5 mm - 10.0 mm - 12.5 mm - 15.0 mm Dimensions : Length: 93 mm...
Content 1 piece
€13.20 *
Round Strap Ends Template Stencil
Round Strap Ends Template Stencil
Transparent, 3 mm thick acrylic stencil for marking or cutting round strap ends. Suitable for straps with the following widths: - 12.70 mm (1/2") - 15.86 mm (5/8") - 19.10 mm (3/4") - 25.40 mm (1") - 31.75 mm (1 1/4") - 38.10...
Content 1 piece
€15.00 *
English Point Strap Ends Template Stencil
English Point Strap Ends Template Stencil
Transparent, 3 mm thick acrylic stencil for marking or cutting of English point strap ends. Suitable for straps with the following widths: - 12.70 mm (1/2") - 15.86 mm (5/8") - 19.10 mm (3/4") - 25.40 mm (1") - 31.75 mm (1...
Content 1 piece
€18.40 *
Spachtel für Kantenfarben
Spachtel für Kantenfarben
Spachtel für Kantenfarben aus Edelstahl, alternative Möglichkeit zum Auftragen von dickflüssigen Kantenfarben auf Lederkanten. Ausgestattet ist diese Spachten mit jeweils einem abgerundeten und einem geraden Ende. Die Spachtel kann...
Content 1 piece
€8.10 *
1 From 2
Shopbewertung - rickert-werkzeug.de
Top